Blackrock LED Driver¶
Available on macOS
Description¶
Interface to a Blackrock LED array driver
Signature¶
iodevice/blackrock_led_driver
Optional Parameters¶
running¶
Variable to set to true when the LED program starts running, false when it stops
temp_a¶
Variable in which to store thermistor readout from bank A (reported in degrees Celsius)
temp_b¶
Variable in which to store thermistor readout from bank B (reported in degrees Celsius)
temp_c¶
Variable in which to store thermistor readout from bank C (reported in degrees Celsius)
temp_d¶
Variable in which to store thermistor readout from bank D (reported in degrees Celsius)
autostart¶
| Default: | NO |
|---|
If YES, the device will start I/O automatically (as if by an
implicit Start IO Device action) when the experiment starts running.
Note: Device I/O will always stop automatically when the experiment stops running, irrespective of this setting.
alt¶
Alternative device to use if this one fails to initialize (e.g. because the required hardware is not available). If #allowAltFailover is set to 0 or false, this parameter is ignored.