NE-500 Syringe Pump Network¶
Available on macOS
Description¶
Used for interfacing to a network of NE-500 syringe pumps, accessed via a serial-to-ethernet bridge or a USB-to-serial adapter
Signature¶
iodevice/ne500
Optional Parameters¶
address¶
| Examples: | "10.0.254.254"/dev/cu.usbserial-FTH1RRH5 |
|---|
If port is provided, the address is taken to be a host name, and MWorks attempts to connect to the pump network via a TCP socket. Otherwise, the address is assumed to be a filesystem path that represents a serial port.
If neither address nor port is provided, MWorks looks for a single, connected serial device. If it finds one, it assumes it to be the desired pump network and attempts to connect.
response_timeout¶
| Default: | 100ms |
|---|
Maximum time to wait for responses to pump commands (microseconds). If no response is received in the allotted time, issue an error message.
log_pump_commands¶
| Default: | YES |
|---|
If YES, log all commands sent to and responses received from the pump network to the MWorks event stream and server console
autostart¶
| Default: | NO |
|---|
If YES, the device will start I/O automatically (as if by an
implicit Start IO Device action) when the experiment starts running.
Note: Device I/O will always stop automatically when the experiment stops running, irrespective of this setting.
alt¶
Alternative device to use if this one fails to initialize (e.g. because the required hardware is not available). If #allowAltFailover is set to 0 or false, this parameter is ignored.
Placement¶
| Allowed at top level: | Yes |
|---|---|
| Allowed parent: | Folder |
| Allowed children: | NE-500 Syringe Pump |