Open Ephys Network Events Client

Available on macOS

Description

Interface to a Network Events module in the Open Ephys GUI application

Signature

iodevice/open_ephys_network_events_client

Required Parameters

hostname

Examples:
localhost
dicarlo-open-ephys-12.mit.edu

Hostname of the computer running the Open Ephys GUI

port

Example:5556

TCP port used by the Network Events module

request

Variable from which to read messages to send to the Network Events module.

Assigning a value to the variable causes the message to be sent immediately. The assignment action will not complete until a response is received or an error or timeout occurs.

Non-string values are converted to strings before being sent.

response

Variable in which to store responses from the Network Events module. Response values are always strings.

Optional Parameters

autostart

Default:NO

If YES, the device will start I/O automatically (as if by an implicit Start IO Device action) when the experiment starts running.

Note: Device I/O will always stop automatically when the experiment stops running, irrespective of this setting.

alt

Alternative device to use if this one fails to initialize (e.g. because the required hardware is not available). If #allowAltFailover is set to 0 or false, this parameter is ignored.

Placement

Allowed at top level: Yes
Allowed parent: Folder