NE-500 Syringe Pump Network

Available on macOS

Description

Used for interfacing to a network of NE-500 syringe pumps, accessed via a serial-to-ethernet bridge or a USB-to-serial adapter

Signature

iodevice/ne500

Optional Parameters

address

Examples
"10.0.254.254"
/dev/cu.usbserial-FTH1RRH5

If port is provided, the address is taken to be a host name, and MWorks attempts to connect to the pump network via a TCP socket. Otherwise, the address is assumed to be a filesystem path that represents a serial port.

If neither address nor port is provided, MWorks looks for a single, connected serial device. If it finds one, it assumes it to be the desired pump network and attempts to connect.

port

Example

100

Port number for TCP connections

response_timeout

Default

100ms

Maximum time to wait for responses to pump commands (microseconds). If no response is received in the allotted time, issue an error message.

log_pump_commands

Default

YES

If YES, log all commands sent to and responses received from the pump network to the MWorks event stream and server console

autostart

Default

NO

If YES, the device will start I/O automatically (as if by an implicit Start IO Device action) when the experiment starts running.

Note: Device I/O will always stop automatically when the experiment stops running, irrespective of this setting.

alt

Alternative device to use if this one fails to initialize (e.g. because the required hardware is not available). If #allowAltFailover is set to 0 or false, this parameter is ignored.

Placement

Allowed at top level:

Yes

Allowed parent:

Folder

Allowed children:

NE-500 Syringe Pump